![]() Match code the camera, you need to put the camera next to the NVRġ) Please attached a camera to the NVR (use a net cable) and the camera needs to be connected to the power supplyģ) “Refreshed” to allow the NVR to find the attached camera (The camera’s IP on the above box must be .x)Ĥ) Found a blank line in the lower sectionĦ) Wait for about 30s and the camera connect success (camera’s IP 172.20.14.x) Install antennas for cameras and take it close to the NVR Then plug the camera to power adapter and use a network cable to connect the camera to NVR’s LAN port.īefore match code please delete the corresponding channel to spare a channel out for a new camera, then you can match and add new camera into the channel. Please refer to below picture to connect the camera to the NVR. If your camera has a network port, please follow the steps below to match code the camera. *Check Original Page: How to Match Code the Wireless Camera that have network port to NVR?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |